Please note, in-stock items will be ready for pick up within 2 hours; however, if an item needs to be special ordered it could take up to 1 week to become available.

Mitek Slant Nail Face Mount Joist Hangers

Mitek

+ -
The HUS, JUS, and MUS  hanger series offers double shear nailing. MiTek’s dimple allows for 30° to 45° nailing through the joist into the header resulting in higher loads and less nailing. Slant/double shear nailing allows for higher load values, fewer nails, and faster installation.
Materials: JUS – 18 gauge; MUS – 18 gauge; HUS – 14 or 16 gauge
Finish: G90 galvanizing
INSTALLATION
  • Use all specified fasteners.
  • Joist nails must be driven at a 30° to 45° angle through the joist or truss into the header to achieve listed loads. Slant/double shear nails must be used to achieve listed load values.
  • JUS / MUS – 16d sinkers (0.148″ x 3-1/4″) may be used where 10d commons are specified with no load reduction.

We Also Recommend

Out of Stock
Mitek USP Structural Connectors Face Mount Joist Hanger
Mitek

Mitek USP Structural Connectors Face Mount Joist Hanger
DECK ANCHOR TRIPLE ZINC
Usp Structural

DECK ANCHOR TRIPLE ZINC
Light Rafter Slopeable U Hanger, 18-Ga. Steel, 2 x 10-In.
Simpson Strong-Tie

Light Rafter Slopeable U Hanger, 18-Ga. Steel, 2 x 10-In.
Guardian Fall Protection Rooftop Safety Kit
Guardian

Guardian Fall Protection Rooftop Safety Kit
Madison Mill Poplar Metal/Nylon Thread Handle
Madison Mill

Madison Mill Poplar Metal/Nylon Thread Handle