HOW TO USE

• Usage
  This paint is ideal for use over properly prepared wallboard, drywall and plaster. Also suitable for use on plywood, wood trim, brick, masonry and cement. Do not use on bare metal, glazed or glossy surfaces.
• Prep
  Surface should be clean, dry and dull. Glossy surfaces should be dulled. Thoroughly clean the surface and remove all dirt, dust, chalk, rust, grease, wax, mildew and peeling paint and allow to dry. See technical data page for additional surface prep.
• Application
  Stir thoroughly before and during use. Apply with a premium-quality polyester brush, “one coat” roller or airless sprayer. If applying by sprayer, back-roll or back-brush to work primer into the surface. Apply a liberal coat of primer uniformly, working well into the surface. Allow to dry at least 2 hours before applying a latex topcoat, overnight for oil topcoats.
• Dry Time
  Dry Time @ 77 °F and 50 % Relative Humidity
  To The Touch: 1 hour - 1 hour
  Recoat: 2 hour - 4 hour
• Clean-up & Disposal
  Clean up with warm, soapy water.